A 5000-CP General Description
The A 5000-CP passive antenna provides an optimum solution for both transmitting and receiving RF signals throughout the UHF spectrum. Installations have demonstrated that the circular polarization of this antenna minimizes variations in signal strength and almost eliminates multipath problems, a primary cause dropouts. The gain of this antenna over the entire UHF band is superior to common `off the shelf´ antennas.The wideband design (450-960MHz) of the A 5000-CP allows it to accommodate antenna distribution systems for either wireless monitors or wireless microphones across multiple frequency ranges, offering maximum flexibility when designing complex RF systems.Features
High Gain
Minimized Multipath
Broadband
Delivery Includes
A 5000-CP
Adapter BNC to N
User Manual
Technical Data
Antenna: circular polarized helical, Half power beam width: + / - 40°---
Antenna gain: 8 dBi
Bandwidth: (- 3 dB) 450 - 960 MHz
Connector: N (female)
Weight: 3.1 Ibs. (1.41 kg)
Dimensions: 356 x 356 x 140 mm
Antenna boosterWith a 42 MHz switching bandwidth and 10 dB amplification, this antenna booster is designed for the upgraded performance characteristics of ew G3 receivers. Up to two AB 3 boosters for each antenna feed can compensate for RF losses through remote antenna cables. Power is supplied to the boosters over the ASA 1/NT 1-1 through the BNC cable. Technical Data
Switching bandwidth : 42 MHz
RF frequency range : 516 ..... 865 MHz
Gain : > 10 dB
Antenna connector : BNC
Impedance : 50 Ohm
Dimensions : 95 x 47 x 21 mm
Weight : 60 g
Variants
AB 3-A (516-558MHz)
AB 3-G (566-608 MHz)
AB 3-GB (606-648 MHz)
AB 3-B (626-668 MHz)
AB 3-C (734-776MHz)
AB 3-D (780-822 MHz)
AB 3-E (823-865 MHz)
Antenna boosterWith a 42 MHz switching bandwidth and 10 dB amplification, this antenna booster is designed for the upgraded performance characteristics of ew G3 receivers. Up to two AB 3 boosters for each antenna feed can compensate for RF losses through remote antenna cables. Power is supplied to the boosters over the ASA 1/NT 1-1 through the BNC cable. Technical Data
Switching bandwidth : 42 MHz
RF frequency range : 516 ..... 865 MHz
Gain : > 10 dB
Antenna connector : BNC
Impedance : 50 Ohm
Dimensions : 95 x 47 x 21 mm
Weight : 60 g
Variants
AB 3-A (516-558MHz)
AB 3-G (566-608 MHz)
AB 3-GB (606-648 MHz)
AB 3-B (626-668 MHz)
AB 3-C (734-776MHz)
AB 3-D (780-822 MHz)
AB 3-E (823-865 MHz)
Antenna boosterWith a 42 MHz switching bandwidth and 10 dB amplification, this antenna booster is designed for the upgraded performance characteristics of ew G3 receivers. Up to two AB 3 boosters for each antenna feed can compensate for RF losses through remote antenna cables. Power is supplied to the boosters over the ASA 1/NT 1-1 through the BNC cable. Technical Data
Switching bandwidth : 42 MHz
RF frequency range : 516 ..... 865 MHz
Gain : > 10 dB
Antenna connector : BNC
Impedance : 50 Ohm
Dimensions : 95 x 47 x 21 mm
Weight : 60 g
Variants
AB 3-A (516-558MHz)
AB 3-G (566-608 MHz)
AB 3-GB (606-648 MHz)
AB 3-B (626-668 MHz)
AB 3-C (734-776MHz)
AB 3-D (780-822 MHz)
AB 3-E (823-865 MHz)
Antenna boosterWith a 42 MHz switching bandwidth and 10 dB amplification, this antenna booster is designed for the upgraded performance characteristics of ew G3 receivers. Up to two AB 3 boosters for each antenna feed can compensate for RF losses through remote antenna cables. Power is supplied to the boosters over the ASA 1/NT 1-1 through the BNC cable. Technical Data
Switching bandwidth : 42 MHz
RF frequency range : 516 ..... 865 MHz
Gain : > 10 dB
Antenna connector : BNC
Impedance : 50 Ohm
Dimensions : 95 x 47 x 21 mm
Weight : 60 g
Variants
AB 3-A (516-558MHz)
AB 3-G (566-608 MHz)
AB 3-GB (606-648 MHz)
AB 3-B (626-668 MHz)
AB 3-C (734-776MHz)
AB 3-D (780-822 MHz)
AB 3-E (823-865 MHz)
Antenna boosterWith a 42 MHz switching bandwidth and 10 dB amplification, this antenna booster is designed for the upgraded performance characteristics of ew G3 receivers. Up to two AB 3 boosters for each antenna feed can compensate for RF losses through remote antenna cables. Power is supplied to the boosters over the ASA 1/NT 1-1 through the BNC cable. Technical Data
Switching bandwidth : 42 MHz
RF frequency range : 516 ..... 865 MHz
Gain : > 10 dB
Antenna connector : BNC
Impedance : 50 Ohm
Dimensions : 95 x 47 x 21 mm
Weight : 60 g
Variants
AB 3-A (516-558MHz)
AB 3-G (566-608 MHz)
AB 3-GB (606-648 MHz)
AB 3-B (626-668 MHz)
AB 3-C (734-776MHz)
AB 3-D (780-822 MHz)
AB 3-E (823-865 MHz)
The passive directional antenna works in the frequency range between 1,400 and 2,400MHz. The use of two AD 1800s in diversity operation allows the user to optimise the antenna positions, and thus the range, in difficult RF environments. The antenna’s directivity boosts the antenna signal by 4dB, the front-to-back ratio is >14dB. An ideal antenna cable is the low-attenuation GZL 5000, which is available in various lengths.
ASP 113
Passive antenna splitter2 x 1 : 2 (ASP 212) or passive antenna splitter 1 x 1 : 3 (ASP 113)and passive antenna splitter 1 x 1 : 4 (ASP 114). DC-coupled for use with antenna boosters. Special version with powering also available for using A 12antennas with EM 3031/32 receivers.Frequency range 30-950 MHzMax. current 0.3 A DCAttenuation approx.4 dB (ASP 212)approx. 6 dB (ASP 113)approx. 8 dB (ASP 114)RF connector BNC socket
ASP 114 Passive antenna splitter2 x 1 : 2 (ASP 212) or passive antenna splitter 1 x 1 : 3 (ASP 113)and passive antenna splitter 1 x 1 : 4 (ASP 114). DC-coupled for use with antenna boosters. Special version with powering also available for using A 12antennas with EM 3031/32 receivers.Frequency range 30-950 MHzMax. current 0.3 A DCAttenuation approx.4 dB (ASP 212)approx. 6 dB (ASP 113)approx. 8 dB (ASP 114)RF connector BNC socket
ASP 212 Passive antenna splitter2 x 1 : 2 (ASP 212) or passive antenna splitter 1 x 1 : 3 (ASP 113)and passive antenna splitter 1 x 1 : 4 (ASP 114). DC-coupled for use with antenna boosters. Special version with powering also available for using A 12antennas with EM 3031/32 receivers.Frequency range 30-950 MHzMax. current 0.3 A DCAttenuation approx.4 dB (ASP 212)approx. 6 dB (ASP 113)approx. 8 dB (ASP 114)RF connector BNC socket
General DescriptionIt is nice when you can concentrate fully on the picture because you know the sound is reliable. This camera receiver allows you to do just that. Equipped with adaptive diversity, the camera receiver ensures reliable reception. Five frequency ranges with up to 75 MHz switching bandwidth also provide optimum flexibility for components of the 2000 series. The transmitter settings can be synchronized quickly from EK 2000 using infrared technology.Features
Sturdy all-metal housing
Up to 3000 frequencies in up to 75 MHz switching bandwidth
20 fixed frequency bands with up to 64 compatible presets
6 bands with up to 64 tunable channels
Adaptive diversity technology for high reliability
Headphone output for optimum control
Pilot tone squelch can be set in 2 dB steps for interference-free reception
Frequency scan feature searches for available reception frequencies
Cordless infrared synchronization of transmitters
User-friendly menu interface with a backlit graphic display
HDX compander for crystal clear sound
Enhanced AF frequency response
4-stage battery status display
External charging contacts for recharging the BA2015 battery
Auto-lock feature to prevent settings from being changed accidentally
Wide range of accessories included in delivery
Delivery Includes
1 EK 2000 diversity receiver
2 AA 1.5 V batteries
1 CA2 camera attachment kit
1 CL 500 line connecting cable
1 CL 1 line connecting cable
1 instruction manual
1 supplementary frequency sheet
Technical Data
Modulation FM
RF frequency range 516 ..... 865 MHz
Carrier frequencies max. 3000
Presets max. 64
Switching bandwidth max. 75 MHz
Signal-to-noise ratio > 120 dB(A)
Squelch threshold off, 5....25 dBμV in 2 dB steps
Compander Sennheiser HDX
Frequency response 25 .... 18000 Hz
Audio output level (balanced) + 17 dBu
Jack plug 3,5 mm
Headphone output level 2 x 12 mW @ 32 OHM
Headphone connector 3,5 mm Jack
Operating voltage (mains) 2x 1,5V AA
Operating time 6-10 h
Dimensions 82 x 64 x 24 mm
Weight 200 g
General DescriptionIt is nice when you can concentrate fully on the picture because you know the sound is reliable. This camera receiver allows you to do just that. Equipped with adaptive diversity, the camera receiver ensures reliable reception. Five frequency ranges with up to 75 MHz switching bandwidth also provide optimum flexibility for components of the 2000 series. The transmitter settings can be synchronized quickly from EK 2000 using infrared technology.Features
Sturdy all-metal housing
Up to 3000 frequencies in up to 75 MHz switching bandwidth
20 fixed frequency bands with up to 64 compatible presets
6 bands with up to 64 tunable channels
Adaptive diversity technology for high reliability
Headphone output for optimum control
Pilot tone squelch can be set in 2 dB steps for interference-free reception
Frequency scan feature searches for available reception frequencies
Cordless infrared synchronization of transmitters
User-friendly menu interface with a backlit graphic display
HDX compander for crystal clear sound
Enhanced AF frequency response
4-stage battery status display
External charging contacts for recharging the BA2015 battery
Auto-lock feature to prevent settings from being changed accidentally
Wide range of accessories included in delivery
Delivery Includes
1 EK 2000 diversity receiver
2 AA 1.5 V batteries
1 CA2 camera attachment kit
1 CL 500 line connecting cable
1 CL 1 line connecting cable
1 instruction manual
1 supplementary frequency sheet
Technical Data
Modulation FM
RF frequency range 516 ..... 865 MHz
Carrier frequencies max. 3000
Presets max. 64
Switching bandwidth max. 75 MHz
Signal-to-noise ratio > 120 dB(A)
Squelch threshold off, 5....25 dBμV in 2 dB steps
Compander Sennheiser HDX
Frequency response 25 .... 18000 Hz
Audio output level (balanced) + 17 dBu
Jack plug 3,5 mm
Headphone output level 2 x 12 mW @ 32 OHM
Headphone connector 3,5 mm Jack
Operating voltage (mains) 2x 1,5V AA
Operating time 6-10 h
Dimensions 82 x 64 x 24 mm
Weight 200 g
General Description
This wireless monitoring set’s receiver uses adaptive diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly.
Features
Sturdy all-metal housing
Up to 3000 frequencies in up to 75 MHz switching bandwidth
20 fixed frequency banks with up to 32 compatible presets
6 banks with up to 32 tunable channels
Adaptive diversity technology for high reliability
Pilot tone squelch can be set in 2 dB steps for interference-free reception
Frequency scan feature searches for available reception frequencies
Wireless synchronization of receiver parameters from transmitter
User-friendly menu interface with a backlit graphic display
HDX compander for crystal clear sound
Enhanced AF frequency response
Backlit graphic display
4-stage battery status display
Charging contacts for recharging BA2015
Auto-lock feature to prevent settings from being changed accidentally
Hi Boost, adjustable limiter, stereo/focus mode, selectable balance on receiver
Wide range of accessories for virtually any use
Delivery Includes
1 EK 2000 IEM diversity receiver
1 IE 4 earphones
1 instruction manual
1 supplementary frequency sheet
Technical Data
Modulation FM, MPX-Stereo
RF frequency range 516 ..... 865 MHz
Carrier frequencies max. 3000
Presets max. 32
Switching bandwidth max. 75 MHz
Signal-to-noise ratio > 90 dB(A)
Squelch threshold off, 5 ... 25 dBμV in 2 dB steps
Frequency response 25.....15000 Hz
Jack plug 3,5 mm
Audio-Output-Power 100 mW @32 OHM
Operating voltage (stand alone) 2x 1,5V AA
Operating time 4 - 6 h
Dimensions 82 x 64 x 24 mm
Weight 200 g
Varients:
EK 2000 IEM AW:Frequency range 516 ... 558 MHz
EK 2000 IEM GW:Frequency range 558 ... 626 MHz
EK 2000 IEM BW:Frequency range 626 ... 698 MHz
EK 2000 IEM CW:Frequency range 718 ... 790 MHz
EK 2000 IEM DW:Frequency range 790 ... 865 MHz
General Description
This wireless monitoring set’s receiver uses adaptive diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly.
Features
Sturdy all-metal housing
Up to 3000 frequencies in up to 75 MHz switching bandwidth
20 fixed frequency banks with up to 32 compatible presets
6 banks with up to 32 tunable channels
Adaptive diversity technology for high reliability
Pilot tone squelch can be set in 2 dB steps for interference-free reception
Frequency scan feature searches for available reception frequencies
Wireless synchronization of receiver parameters from transmitter
User-friendly menu interface with a backlit graphic display
HDX compander for crystal clear sound
Enhanced AF frequency response
Backlit graphic display
4-stage battery status display
Charging contacts for recharging BA2015
Auto-lock feature to prevent settings from being changed accidentally
Hi Boost, adjustable limiter, stereo/focus mode, selectable balance on receiver
Wide range of accessories for virtually any use
Delivery Includes
1 EK 2000 IEM diversity receiver
1 IE 4 earphones
1 instruction manual
1 supplementary frequency sheet
Technical Data
Modulation FM, MPX-Stereo
RF frequency range 516 ..... 865 MHz
Carrier frequencies max. 3000
Presets max. 32
Switching bandwidth max. 75 MHz
Signal-to-noise ratio > 90 dB(A)
Squelch threshold off, 5 ... 25 dBμV in 2 dB steps
Frequency response 25.....15000 Hz
Jack plug 3,5 mm
Audio-Output-Power 100 mW @32 OHM
Operating voltage (stand alone) 2x 1,5V AA
Operating time 4 - 6 h
Dimensions 82 x 64 x 24 mm
Weight 200 g
Varients:
EK 2000 IEM AW:Frequency range 516 ... 558 MHz
EK 2000 IEM GW:Frequency range 558 ... 626 MHz
EK 2000 IEM BW:Frequency range 626 ... 698 MHz
EK 2000 IEM CW:Frequency range 718 ... 790 MHz
EK 2000 IEM DW:Frequency range 790 ... 865 MHz
General Description
This wireless monitoring set’s receiver uses adaptive diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly.
Features
Sturdy all-metal housing
Up to 3000 frequencies in up to 75 MHz switching bandwidth
20 fixed frequency banks with up to 32 compatible presets
6 banks with up to 32 tunable channels
Adaptive diversity technology for high reliability
Pilot tone squelch can be set in 2 dB steps for interference-free reception
Frequency scan feature searches for available reception frequencies
Wireless synchronization of receiver parameters from transmitter
User-friendly menu interface with a backlit graphic display
HDX compander for crystal clear sound
Enhanced AF frequency response
Backlit graphic display
4-stage battery status display
Charging contacts for recharging BA2015
Auto-lock feature to prevent settings from being changed accidentally
Hi Boost, adjustable limiter, stereo/focus mode, selectable balance on receiver
Wide range of accessories for virtually any use
Delivery Includes
1 EK 2000 IEM diversity receiver
1 IE 4 earphones
1 instruction manual
1 supplementary frequency sheet
Technical Data
Modulation FM, MPX-Stereo
RF frequency range 516 ..... 865 MHz
Carrier frequencies max. 3000
Presets max. 32
Switching bandwidth max. 75 MHz
Signal-to-noise ratio > 90 dB(A)
Squelch threshold off, 5 ... 25 dBμV in 2 dB steps
Frequency response 25.....15000 Hz
Jack plug 3,5 mm
Audio-Output-Power 100 mW @32 OHM
Operating voltage (stand alone) 2x 1,5V AA
Operating time 4 - 6 h
Dimensions 82 x 64 x 24 mm
Weight 200 g
Varients:
EK 2000 IEM AW:Frequency range 516 ... 558 MHz
EK 2000 IEM GW:Frequency range 558 ... 626 MHz
EK 2000 IEM BW:Frequency range 626 ... 698 MHz
EK 2000 IEM CW:Frequency range 718 ... 790 MHz
EK 2000 IEM DW:Frequency range 790 ... 865 MHz
General Description
This wireless monitoring set’s receiver uses adaptive diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly.
Features
Sturdy all-metal housing
Up to 3000 frequencies in up to 75 MHz switching bandwidth
20 fixed frequency banks with up to 32 compatible presets
6 banks with up to 32 tunable channels
Adaptive diversity technology for high reliability
Pilot tone squelch can be set in 2 dB steps for interference-free reception
Frequency scan feature searches for available reception frequencies
Wireless synchronization of receiver parameters from transmitter
User-friendly menu interface with a backlit graphic display
HDX compander for crystal clear sound
Enhanced AF frequency response
Backlit graphic display
4-stage battery status display
Charging contacts for recharging BA2015
Auto-lock feature to prevent settings from being changed accidentally
Hi Boost, adjustable limiter, stereo/focus mode, selectable balance on receiver
Wide range of accessories for virtually any use
Delivery Includes
1 EK 2000 IEM diversity receiver
1 IE 4 earphones
1 instruction manual
1 supplementary frequency sheet
Technical Data
Modulation FM, MPX-Stereo
RF frequency range 516 ..... 865 MHz
Carrier frequencies max. 3000
Presets max. 32
Switching bandwidth max. 75 MHz
Signal-to-noise ratio > 90 dB(A)
Squelch threshold off, 5 ... 25 dBμV in 2 dB steps
Frequency response 25.....15000 Hz
Jack plug 3,5 mm
Audio-Output-Power 100 mW @32 OHM
Operating voltage (stand alone) 2x 1,5V AA
Operating time 4 - 6 h
Dimensions 82 x 64 x 24 mm
Weight 200 g
Varients:
EK 2000 IEM AW:Frequency range 516 ... 558 MHz
EK 2000 IEM GW:Frequency range 558 ... 626 MHz
EK 2000 IEM BW:Frequency range 626 ... 698 MHz
EK 2000 IEM CW:Frequency range 718 ... 790 MHz
EK 2000 IEM DW:Frequency range 790 ... 865 MHz
EK 2000-DW Frequency range 790 ... 865 MHzGeneral DescriptionIt is nice when you can concentrate fully on the picture because you know the sound is reliable. This camera receiver allows you to do just that. Equipped with adaptive diversity, the camera receiver ensures reliable reception. Five frequency ranges with up to 75 MHz switching bandwidth also provide optimum flexibility for components of the 2000 series. The transmitter settings can be synchronized quickly from EK 2000 using infrared technology.Features
Sturdy all-metal housing
Up to 3000 frequencies in up to 75 MHz switching bandwidth
20 fixed frequency bands with up to 64 compatible presets
6 bands with up to 64 tunable channels
Adaptive diversity technology for high reliability
Headphone output for optimum control
Pilot tone squelch can be set in 2 dB steps for interference-free reception
Frequency scan feature searches for available reception frequencies
Cordless infrared synchronization of transmitters
User-friendly menu interface with a backlit graphic display
HDX compander for crystal clear sound
Enhanced AF frequency response
4-stage battery status display
External charging contacts for recharging the BA2015 battery
Auto-lock feature to prevent settings from being changed accidentally
Wide range of accessories included in delivery
Delivery Includes
1 EK 2000 diversity receiver
2 AA 1.5 V batteries
1 CA2 camera attachment kit
1 CL 500 line connecting cable
1 CL 1 line connecting cable
1 instruction manual
1 supplementary frequency sheet
Technical Data
Modulation FM
RF frequency range 516 ..... 865 MHz
Carrier frequencies max. 3000
Presets max. 64
Switching bandwidth max. 75 MHz
Signal-to-noise ratio > 120 dB(A)
Squelch threshold off, 5....25 dBμV in 2 dB steps
Compander Sennheiser HDX
Frequency response 25 .... 18000 Hz
Audio output level (balanced) + 17 dBu
Jack plug 3,5 mm
Headphone output level 2 x 12 mW @ 32 OHM
Headphone connector 3,5 mm Jack
Operating voltage (mains) 2x 1,5V AA
Operating time 6-10 h
Dimensions 82 x 64 x 24 mm
Weight 200 g
General Description
The EZL 2020-20L charger case has been designed to be highly user-friendly. It acts as both the storage case for all equipment and charging station for the TourGuide receivers and transmitter. Twenty charging bays for the receivers and two charging bays for the transmitter—or its rechargeable battery pack—are provided. Truly impressive feature of the charging case is the Copy button. All you need do is to set one receiver to the correct channel, press this button just once, and all of the other receivers in the case will immediately be set to the same channel.Features
Charging bays for 20 HDE 2020-D receivers
Charging bay for SK 2020-D
Charging bay for BA 2015 spare battery
Fast charging of all system components in approx. 2.5 hrs
Trickle charge
Safe recharging with temperature monitoring
Copy button copies the selected channel of one receiver to the 19 others and sets the volume to default
Delivery Includes
1 pcs. EZL 2020-20L
Technical Data
Mains voltage 100–240 VAC (50/60 Hz)
Power consumption max. 70 W
Charging time HDE 2020-D, < 2,5 h; SK 2020-D / BA 2015 < 3,5 h
Operating temperature 0–40 °C
Dimensions 600 x 270 x 380 mm
Weight 8,3 kg
General DescriptionHDE 2020-D stethoset TourGuide receiver is the comfortable to wear receiver of the digital Tourguide System 2020-D. This truly unique device integrates both the receiver and headphones and delivers a number of advantages for you. No longer will your audience have to carry any more equipment than is absolutely necessary. Being a one piece device, they will no longer risk a tangle of cables! The powerful battery ensures that the device will work for up to 8 hours. Regardless of whether you are providing your tour in a big city or a large corporation, TourGuide 2020-D will ensure that your tour will proceed without interruption. The stethoset receiver automatically deactivates itself the moment that it is taken off, meaning battery life will be preserved. No longer will the tourguide need to check all of the sets after one tour finishes and before the next tour starts. Your tour participants will be able to individually adjust the volume through a rotary control on the receiver, without the need to even take the device off. An LC display will clearly confirm the volume, battery status, quality of reception and the channel being listened to. Channels can easily be set and adjusted by using the middle buttons. The reception range is about 100 m if your tour is outdoors and about 50 m if your tour is indoors.
Features
6 channels in the license-free frequency range Europe: 863 – 865 MHz
Automatic on/off switch
Large rotary volume control
Backlit display shows:
the channel selection
battery status
signal quality
volume setting
Technical Data
Modulation 2 FSK
RF frequency range 863 - 865 MHz
Tourguide mode 6 channels in parallel
Conference mode 8 channels in parallel
Frequency response (headphones) 100 - 7000
Sound pressure level (SPL) 120 dB SPL
THD, total harmonic distortion < 1 %
Operating time (Accupack) 8 h
Akkudaten 830 mAh Lithium-Polymer
Operating temperature 0 - 50 °C
Dimensions 245 x 125 x 20 mm
Weight incl. Accu 73 g
General DescriptionHDE 2020-D-US stethoset TourGuide receiver is the comfortable to wear receiver of the digital Tourguide System 2020-D. This truly unique device integrates both the receiver and headphones and delivers a number of advantages for you. No longer will your audience have to carry any more equipment than is absolutely necessary. Being a one piece device, they will no longer risk a tangle of cables! The powerful battery ensures that the device will work for up to 8 hours. Regardless of whether you are providing your tour in a big city or a large corporation, TourGuide 2020-D will ensure that your tour will proceed without interruption. The stethoset receiver automatically deactivates itself the moment that it is taken off, meaning battery life will be preserved. No longer will the tourguide need to check all of the sets after one tour finishes and before the next tour starts. Your tour participants will be able to individually adjust the volume through a rotary control on the receiver, without the need to even take the device off. An LC display will clearly confirm the volume, battery status, quality of reception and the channel being listened to. Channels can easily be set and adjusted by using the middle buttons. The reception range is about 50 m if your tour is outdoors and about 25 m if your tour is indoors.
Features
6 channels in the license-free frequency range USA: 926–928 MHz
Automatic on/off switch
Large rotary volume control
Backlit display shows:
the channel selection
battery status
signal quality
volume setting
Technical Data
Modulation 2 FSK
RF frequency range 926 - 928 MHz
Number of channels 6
Frequency response (headphones) 100 - 7000 Hz
Sound pressure level (SPL) 120 dB SPL
THD, total harmonic distortion < 1 %
Operating time (Accupack) 8 h
Power supply 830 mAh Lithium-Plolymer
Operating temperature 0 - 50 °C
Dimensions 245 x 125 x 20 mm
Weight incl. Accu 73 g
General DescriptionThe L 2015 quick-charging unit automatically recharges two Sennheiser BA 2015 rechargeable battery packs. The battery packs are either inserted directly into the charger or remain in their bodypack transmitters/receivers of the 2015 System or the evolution wireless G2 300 and 500 Series. FeaturesConvenient quick-chargingCharging unit recognizes a fully charged battery and automatically switches to trickle chargingTemperature and voltage are monitored for increased safetyBodypack transmitters/receivers are automatically switched off when they are inserted into the L 2015Long battery life due to overcharge protection and regeneration of exhausted batteriesAutomatic fault detectionSeveral charging units can be daisy-chained and powered by one power supply unitDelivery Includes1 L 2015 charging unitOperating instructionsFor more information, please visit this products webpage.
General DescriptionThe L 2021-40 charger rack has been specially designed for stationary applications. It holds up to 40 receivers that will automatically quick-charge to be ready for the next event. At the same time, the L 2021-40 serves as an ethernet interface to allow pre-selecting the active channel for each receiver on a central PC. Up to 125 charger racks with up to 5000 receivers can be connected to the PC. The CC 2021 control software offers simple presets to select and confirm channels for them all with just one click. Users and service staff can easily monitor which receivers at which station have been prepared for any given language or program. Configuration problems are a thing of the past!
Features
Quick-charge of up to 40 pcs. HDE 2020-D receivers in less than 2,5 hours
Copy-function for the quick and easy transmission of the channel configuration
Ethernet-port to connect the PC-control software CC 2021
Certificate of Compliance according:
-CAN/CSA 60065-03 incl. AM 1
-UL Std No. 60065-2006
-IEC 60065(ed. 7); am 1
Delivery Includes
L 2021-40
CC 2021: Receiver configuration PC software on CD-ROM
Technical Data
Operating temperature 0°C ... +40°CMains voltage 100 - 240 V ( 50 / 60 Hz)Power consumption ≤ 150 WVoltage 5 V per charging slotPower supply 400 mA per charging slotCharging time ≤ 2,5 hDimensions 483 mm x 399 mm x 172 mmWeight 8800 g
2.329,00 €*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...